KWIK MIX
Mortar Mix Type S - 66lb
SKU: 66SAKM | Model Number: KM66
$898 /bg
Leis Lumber
In Stock
In-Store Pick-Up
Delivery Available
Description
One 30kg (66lb) bag of Mortar Mix S lays 14 standard block or 31 Max Brick with a 1cm (3/8”) joint.
A 30kg bag will use approximately 4 litres of potable water.
Empty the required amount of material into a mortar box, wheelbarrow or onto a smooth working surface.
Form a crater and add potable water, a little at a time, and mix thoroughly.
Note: If the mixture is thick, then add more water, but avoid a runny mixture.
Remixing reduces performance. Mortar should have full coverage on all surfaces for long lasting results.
For best results:
Do’s
Always use clean equipment, tools and potable water.
All surfaces should be clean and free of oil, gas, paint, grease, etc. before applying Mortar Mix.
A mechanical paddle-type mixer is recommended.
Use a measurable container so the exact amounts are used for each batch.
Mix for 6 to 8 minutes. Thoroughly dampen the brick, block or repair area before applying the new Mortar to prevent premature drying of the new material.
Keep the new Mortar damp for at lease 3 days by occasional fine spraying of water.
Exceeds ASTM C-270 for Type “S” Mortar when mixed and installed as directed.
Don’ts
Avoid working in extreme heat.
Use only when the temperature is 5°C (41°F) and rising. In cooler weather, use warm (not hot) water.
